Equipment / XERF
Portable with Impedance-Guided State Control for Aesthetic RF Procedures
No reviews yetKey attributes
- RF type
- Monopolar
- Frequencies
- 2MHz, 6.78MHz
- Maximum RF output 2MHz
- 250W / Standby power 300W
- Maximum RF output 6.78MHz
- 250W / Standby power 300W
- RF Electrode output level
- Level 1-10
- Interval Continuous firing mode
- Off, 100, 200, 500
Similar products
Key attributes
| RF type | Monopolar |
|---|---|
| Frequencies | 2MHz, 6.78MHz |
| Maximum RF output 2MHz | 250W / Standby power 300W |
| Maximum RF output 6.78MHz | 250W / Standby power 300W |
| RF Electrode output level | Level 1-10 |
| Interval Continuous firing mode | Off, 100, 200, 500 |
| User interface | 15 inch LCD touch screen display |
| System cooling | Air cooling |
| Packaging dimensions | 50cm (L) x 48cm (W) x 52cm (H) |
| Means and degree of protection against electric shock | Class I, a Type BF applied part |
| Gross Weight | 19 kg |
| Electrical rating | Single phase AC 100-120 V, 50/60 Hz Power consumption: 1kVA (Fuse: 125V / 10A) |
| Tip temperature cutoff | 43 °C |
| Vibration Level | low/medium/high |
Ratings & reviews
No product reviews have been published.
No store reviews have been published.
Supplier
Product description
The Portable XERF incorporates an impedance synchronization protocol that structures every treatment session through three distinct operational states: Standby, Ready, and Run. In Standby, parameters are configured while RF energy remains inactive. Transition to Ready follows successful impedance matching between the handpiece tip and patient tissue, confirmed via the control panel and handpiece display. Only then does the system permit progression to Run for actual RF delivery, with continuous monitoring maintaining protocol integrity throughout the procedure. This state-driven architecture ensures that energy output occurs solely under verified contact conditions, with automatic return to Standby if synchronization fails or safety thresholds are encountered. The handpiece LED provides immediate visual feedback: white for Standby, green for Ready, and blue during active RF emission in Run state. Practitioners manage the entire sequence through either finger switch or foot switch activation, with shot count and delivered energy displayed in real time on both the main interface and handpiece readout.
| Parameter | Specification |
|---|---|
| Model | XERF |
| RF type | Monopolar |
| Frequencies | 2MHz, 6.78MHz |
| Maximum RF output 2MHz | 250W / Standby power 300W |
| Maximum RF output 6.78MHz | 250W / Standby power 300W |
| RF Electrode output level | Level 1-10 |
| Interval Continuous firing mode | Off, 100, 200, 500 |
| User interface | 15 inch LCD touch screen display |
| System cooling | Air cooling |
| Packaging dimensions | 50cm (L) x 48cm (W) x 52cm (H) |
| Means and degree of protection against electric shock | Class I, a Type BF applied part |
| Gross Weight | 19 kg |
| Electrical rating | Single phase AC 100-120 V, 50/60 Hz Power consumption: 1kVA (Fuse: 125V / 10A) |
| Tip temperature cutoff | 43 °C |
| Vibration Level | low/medium/high |